Megasun - Solar Water Heaters by Helioakmichange languagechange language

Our Premises
30-year Reputation
Products (you are here)
Solar Water Heaters
Technical Specifications
Installation Guide (you are here)
Forced Circulation Systems

International Recongition
Exports
Contact


Solar Water Heaters by Helioakmi Ltd.



Greece Solar Systems: Solar Water Heater Manufacturers & Exporters, Megasun Solar Heating Systems

7. FILLING INSTRUCTIONS OF THE CLOSED CIRCUIT WITH THERMAL FLUID
For the antifreeze protection of the solar water heater, please follow the ratio of antifreeze protection stated in the table here below.

Mix well the thermal fluid "SOLATHERM" with water.

Start filling the closed circuit with the mixture, from the pipes (14) and (02). The filling must be done alternatively, from both pipes (14) and (02).
During the filling, we advice you to shake the system, so that to ensure that no air is trapped inside the storage tank and the collector.
Continue this procedure until the close circuit is completely full.
Filling instructions of the closed circuit with thermal fluid
After the filling of the closed circuit, it is necessary to loose the plug (17A) at the top right hand of the collector, until it starts dripping thermal fluid (for models 200, 260 and 300 with two collectors, loose also the top pipe union (12) in order to release the air from the collector(s). Filling instructions of the closed circuit with thermal fluid
Tighten again the plug (17A) and the collector connector (12) and check for their complete water tightness. Filling instructions of the closed circuit with thermal fluid
Add some more SOLATHERM fluid in the closed circuit, until it overflows from the tubes (14) and (02). Screw the plug (14A) onto the tube (14) and fix the safety valve (02A) onto the tube (02). Filling instructions of the closed circuit with thermal fluid
Check carefully all the connections for complete water tightness.

Place the protective side cover (20).
Filling instructions of the closed circuit with thermal fluid
ANTIFREEZE PROTECTION RATIO TABLE FOR THE SOLAR WATER HEATER
MODEL M E G A S U N
120x2.10m2 160x2.60m2 200x2.60m2 200x4.20m2 260x4.20m2 300x4.20m2 300x5m2
Closed Circuit
Total Capacity
9 lt 11 lt 13 lt 18 lt 21 lt 22 lt 23 lt
Temperature Ratio
-5 ° C Water
Fluid
8 lt
1 lt
10 lt
1 lt
11.5 lt
1.5 lt
16 lt
2 lt
19 lt
2 lt
19.5 lt
2.5 lt
20.5 lt
2.5 lt
-11 ° C Water
Fluid
7 lt
2 lt
9 lt
2 lt
10.5 lt
2.5 lt
14.5 lt
3.5 lt
16.5 lt
4.5 lt
17.5 lt
4.5 lt
18.5 lt
4.5 lt
-18 ° C Water
Fluid
6 lt
3 lt
7.5 lt
3.5 lt
9 lt
4 lt
12.5 lt
5.5 lt
14.5 lt
6.5 lt
15.5 lt
6.5 lt
16 lt
7 lt
-20 ° C Water
Fluid
6 lt
3 lt
7.5 lt
3.5 lt
9 lt
4 lt
12 lt
6 lt
14 lt
7 lt
14.5 lt
7.5 lt
15.5 lt
7.5 lt
-27 ° C Water
Fluid
5.5 lt
3.5 lt
6.5 lt
4.5 lt
7.5 lt
5.5 lt
10.5 lt
7.5 lt
12.5 lt
8.5 lt
13 lt
9 lt
13.5 lt
9.5 lt
-36 ° C Water
Fluid
4.5 lt
4.5 lt
5.5 lt
5.5 lt
6.5 lt
6.5 lt
9 lt
9 lt
10.5 lt
10.5 lt
11 lt
11 lt
11.5 lt
11.5 lt



 «« previous 

Installation Guide MAIN

 next »» 


 Download the Installation Guide 
in PDF files -- Click here...



No.1 under the sun!


// Home Page // Our Premises // 30-year Reputation // Products // International Recognition //
// Exports // Contact // Greek/Eλληνικα // Espagnol/Español // French/Français // Italian/Italiano //


Back to our Home Page greek/ελληνικα spanish/español italian/italiano french/français