| 01 | Storage tank |
| 01A+B | Storage tank's suspension point (used only in production process, ignore them) |
| 01C | Handles |
| 02 | Filling pipe (for the closed circuit) |
| 02A | Safety valve 3 BAR |
| 03 | Elbow raccord (4 pcs) |
| 04 | Thermal fluid inlet pipe (to the storage tank from the collector) (indication "jacket") |
| 05 | Small connection tube |
| 05A | Insulated cover of the small connection tube |
| 06 | Raccord |
| 07 | Watertight compression ring (4 pcs) |
| 08 | Hot water outlet pipe for home consumption (indication: "hot outlet") |
| 09 | Magnesium rod |
| 09A | Magnesium rod socket |
| 09B | Magnesium rod's plug (1/2 ") |
| 10 | Thermal fluid outlet pipe (from the collector to the storage tank) |
| 11 | Collector(s) |
| 12 | Pipe unions (collector connectors). Only for models with two collectors |
| 13 | Bottom left hand collector pipe |
| 13A | Plug 1/2" |
| 14 | Filling pipe for the closed circuit |
| 14A | Plug 1/2" |
| 15 | Cold-water inlet pipe (indication: "cold inlet") |
| 15A | Reducer (3/4" - 1/2") |
| 15B | Non-return valve |
| 15C | Spherical switch (1/2") |
| 15BC | Non-return valve and spherical switch ¤ |
| 16 | Thermal fluid outlet pipe (from the storage tank to the collector) (Indication: "jacket") |
| 17 | Top right hand collector pipe |
| 17A | Plug 1/2" |
| 18 | Large connection tube with insulation cover |
| 19 | Thermal fluid inlet pipe (return to the collector) |
| 20 | Protective side cover |
| 20A | Face plate |
| ¤15BC | This valve replaces 15B and 15C and it is supplied only in special cases |
